GLASSPROTECT

Use:
Professional-grade glass protection that creates a hydrophobic, self-cleaning surface, preserves optical clarity and extends the service life of the glass.

Application method:
Low-pressure sprayer, microfibre cloth

Substrates:
All glass, glazed ceramic

Finish:
Invisible, optically clear

Coverage rate:
Approx. 5–10 mL per m²

Chemical resistance:
Enhanced resistance to routine environmental exposure and cleaning cycles

Packaging:
1L, 5L

Expected service life:
Up to 10 years

Purpose:
GLASSPROTECT™ is designed to create a hydrophobic, self-cleaning surface that
preserves optical clarity and extends the service life of glass.

Procedure:
1. Ensure glass is clean, dry, and free from mineral deposits, coatings,
silicones, or polishing residues, and prepare with PRECLEAN™.
2. Apply only to dry glass between 5°C and 30°C. Avoid rain or water exposure
during curing.
3. Spray a thin, even layer and immediately level with a microfibre cloth, in a
lateral/vertical motion, working in controlled sections.
4. Allow the specified flash time, then lightly buff away excess residue with a
clean microfibre cloth.
5. Avoid water contact for 24 hours. Full performance develops over several
days.

Important:
• Proper surface preparation is critical for bonding performance.

• Do not apply to wet or contaminated glass.

• Always test on a small, inconspicuous area prior to full application.

• If visible high spots or unlevelled areas appear, reapply a small amount
of product to the affected section and rebuff to level the surface.

• During initial curing, a fine haze, light cloth marks or dusting effect
may be visible. This is normal. Full optical clarity develops as the coating settles and will typically resolve after the first cleaning cycle or a light rinse and dry.

Product type:
Reactive glass surface coating

Precautions:
1. Use only in well-ventilated areas during application and initial curing.
2. Avoid inhalation of vapours and prolonged skin contact.
3. Avoid contact with the eyes.
4. Wear protective gloves and eye protection during application.
5. Keep out of reach of children.

Application safety:
• Do not apply near open flames, sparks or ignition sources.
• Avoid applying in confined or poorly ventilated spaces.
• Prevent product from entering drains or waterways.

Storage:
Store sealed in the original container in a cool, dry place away from direct sunlight and extreme temperatures.

Full Safety Data Sheet (SDS) download link below