PRECLEAN

Use:
Removes oils, silicones, light contaminants and residues prior to coating

Application method:
Low-pressure sprayer, lint-free microfibre cloth

Substrates:
Suitable for hard surfaces

Finish:
No residue

Packaging:
1L, 5L

Flash time:
Rapid evaporation under normal ambient conditions

Purpose:
PRECLEAN™ is used to prepare the substrate before applying JUMBOGUARD™ nano-coatings. Correct preparation is critical for optimal bonding and long-term performance.

Procedure:
1. Ensure the surface is dry and free of loose debris.
2. Spray PRECLEAN™ evenly onto the surface.
3. Wipe the surface evenly to dissolve oils and residues.
4. If required, buff with a second clean, dry cloth.
5. Allow the surface to fully flash dry before coating application.

Important:
• Always use clean cloths and replace them frequently.
• Do not allow product to pool or dry unevenly.
• Always test on delicate finishes prior to full application.

Product type:
Glass surface nano coating

Precautions:
1. Use only in well-ventilated areas during application and initial curing.
2. Avoid inhalation of vapours and prolonged skin contact.
3. Avoid contact with the eyes.
4. Wear protective gloves and eye protection during application.
5. Keep out of reach of children.

Application safety:
• Do not apply near open flames, sparks or ignition sources.
• Avoid applying in confined or poorly ventilated spaces.
• Prevent product from entering drains or waterways.

Storage:
Store sealed in the original container in a cool, dry place away from direct sunlight and extreme temperatures.

Full Safety Data Sheet (SDS) download link below